Other information:
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door quadrant cover (A).
3.
Disconnect the power door mirror connector (A) from the harness.
4.
Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.
...
Replacement
•
When installing the belt, be careful not to damage the retractor.
1.
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
2.
Loosen the rear seat belt upper anchor (A) mounting bolt.
3.
After loosening the ...