The ICM relay is integrated with outside mirror fold/unfold
relay, front deicer relay and rear fog lamp relay and is installed
inside the lower crash pad.
Inspection
Normal Charge Port Relay
Check for continuity between the terminals.
1.
There should be continuity between terminals No.20 and No.10
when power and ground are connected to terminals ...
Installation
Battery temperature sensor can not be disassembled.
1.
Turn the ignition switch OFF.
2.
Shut off the high voltage.
(Refer to Battery Control System - "High Voltage Shut-off Procedure")
3.
Remove the high voltage battery system assembly.
(Ref ...