Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure the resistance between terminals "1" and "2" of the evaporator temperature sensor.
4.
Connect the evaporator temperature sensor connector.
5.
Run the engine and turn ...
Installation
Battery temperature sensor can not be disassembled.
1.
Turn the ignition switch OFF.
2.
Shut off the high voltage.
(Refer to Battery Control System - "High Voltage Shut-off Procedure")
3.
Remove the high voltage battery system assembly.
(Ref ...