Other information:
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the brake fluid level switch connector (A), and remove the reservoir cap.
Be sure to completely remove foreign substances around brake
fluid reservoir and cap be ...
Components Location
High Voltage Battery System Assembly
1. BMS ECU2. Main Relay 3. Pre Charge Relay4. Pre Charge Resistor5. Battery Current Sensor6. Safety Plug7. Main Fuse8. Battery Temperature Sensor9. Runaway Arresting Device (RAD)10. High Voltage Battery Heater (With heater system)11. ...