Other information:
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the AVN head unit.
(Refer to Body Electrical System - "AVN System")
3.
Disconnect the VESS unit connector (A).
4.
Remove VESS unit (A) after loosening the mounting nut and screw.
Installation
1.
Install the VESS ...
Replacement
[Without Heat Pump]
1.
Remove the condenser, and then use an L wrench to remove the bottom cap (B) from the condenser.
Tightening torque :
9.8 ~ 14.9 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
2.
Remove the desiccant (A) from the condenser using a long
nose plier. Che ...