Inspection
Check for continuity between the terminals while operating
the wiper and washer switch. If it is not in normal condition, replace
wiper and wiper switch.Wiper Switch
Washer Switch
...
Removal
1.
Loosen the windshield wiper arm nut (B) after removing the wiper cap (A).
2.
Remove the windshield wiper arm and blade.
3.
If necessary, release the wiper blade fixing clip by p ...
Inspection
Battery Voltage and Status
Check the battery voltage and status using the battery tester.
Battery Terminal
1.
Move back and forth to check that the battery terminals (A) are loose or corroded.
If the terminals are corroded, clean them.
If battery posi ...