Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Using the flat screw driver or remover, remove the crash pad center air vent panel (A). |
3. |
Disconnect the hazard switch connector (A). |
4. |
Remove center fascia upper panel (A) after loosening the mounting screws. |
5. |
Disconnect the charge information lamp connector (A). |
6. |
Remove the charge information lamp assembly (A) after loosening the mounting screws. |
Installation |
1. |
Install the charge information lamp assembly, center fascia upper panel and crash pad center air vent panel. |
2. |
Connect the negative (-) battery terminal. |