Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear combination lamp (A) after loosening the mounting screws. |
3. |
Disconnect the rear combination lamp connector (A). |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear combination lamp assembly. |
3. |
Remove the turn signal lamp socket (A) by turning the socket counterclockwise. |
4. |
Remove the turn signal lamp bulb (A). |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear combination lamp assembly. |
3. |
Remove the back up lamp socket (A) by turning the socket counterclockwise. |
4. |
Remove the back up lamp bulb (A). |
Installation |
1. |
Install the rear combination lamp assembly. |
2. |
Connect the negative (-) battery terminal. |