Other information:
Removal and Installation
1.
Shut off the high voltage.
(Refer to Battery Control System – “High Voltage Shut-off Procedure”)
2.
Disconnect the auxiliary battery (12V) negative (-) terminal.
3.
Disconnect the connector (A).
4.
Remove the actuator by loosening the bolts (B).
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license plate lamp assembly (A).
3.
Replace the bulb (B) after removing the license plate lamp (A).
Installation
1.
Install the bulb.
2.
Install the license plate lamp assembly. ...