Other information:
Inspection
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
Before filling the reservoir tank with water, check the
filter for any foreign material or contamination. If necessary, clean
the filter.
2.
Connect po ...
Inspection
1.
Turn the ignition switch OFF and disconnect the auxiliary battery (12V) negative (-) terminal.
2.
Connect the GDS to DLC.
3.
Turn the ignition switch ON.
4.
Inspect "Control Duty" and waveforms according to "Fan Status" by performing "Actuation Test" on GDS.
Cooling ...