Other information:
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher intensive light and reduce with lower intensive light.
1. Auto Light Signal2. Auto ...
Inspection
1.
Check the tire pressure.
(230+7 kPa (33psi+1.0psi)
2.
Check the tire tread wear.
(Refer to Suspension System - "Tire")
3.
Check if the wear of tire tread is uneven.
(Refer to Suspension System - "Alignment") ...