Other information:
Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console assembly.(Refer to Body - “Floor console assembly")
3.
Disconnect the EPB control unit mounting nuts and then remove EPB control unit.
Tighten torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 ...
Oil Specification
1.
The HFC-134a system requires synthetic compressor oil (POE)
whereas the R-12 system requires mineral compressor oil. The two oils
must never be mixed.
2.
Compressor oil (POE) varies according to compressor model. Be sure to use oil specified for the model of compress ...