Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Pull out the relay from the engine compartment relay box.
Power Relay (Type A)
–
Do not ...
Description
Smart Junction Box(SJB)
1.
General function : Interior Junction Box + some functions of BCM
It uses CAN communication and IPS to control loads.
2.
Main functions:
–
Low ...
Description
Installed in MDPS (Motor Driven Power Steering), the Steering
Angle Sensor (SAS) sends signals to HECU through CAN communication
line.
The SAS is used to determine turning direction and speed of the steering wheel.
The HECU uses the signals from the SAS when performing ESP-relat ...