Other information:
Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console assembly.(Refer to Body - “Floor console assembly")
3.
Disconnect the EPB control unit mounting nuts and then remove EPB control unit.
Tighten torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 ...
Inspection
When removing the battery pack assembly to inspect the
battery system, it can be connected to vehicle by using the SST
0K918-E4100, 0K375-E4100, 0K375-E4200.
1.
Turn the ignition switch OFF.
2.
Shut off the high voltage.
(Refer to Battery Contr ...