Other information:
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the brake fluid level switch connector (A), and remove the reservoir cap.
Be sure to completely remove foreign substances around brake
fluid reservoir and cap be ...
Schematic Diagrams
Input Connector (AC)
TerminalDescriptionSpecificationCurrent (normal)Voltage (maximum)1Phase voltage (L1)_220VAC33A310VAC2Ground3Phase voltage (L2)_220VAC
Output Connector (DC)
TerminalDescriptionSpecificationCurrent (normal)Voltage (maximum)1High Voltage Battery (-)25 ...