Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove engine room under cover.
(Refer to Motor System - "Under Cover")
3.
Remove the horn (A) after disconnecting the mounting bolt and connector.
Installation
1.
Install the horns after connecting the horn connectors.
...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
•
Be ca ...