Other information:
Inspection
C-CAN Terminating Resistance Inspection (Multi Purpose Check Connector)
1.
Turn the ignition OFF.
2.
Measure the resistance between pins No. 20 and No. 17 of multi purpose check connector (20 pins).
Measure the resistance between pins No. 3 and No. 11 of DLC (16 pins).
Spec ...
Replacement
•
Take care to not let the tail gate fall on you as the lifts
are removed. Have a helper hold the tail gate open, or use a secure
method to hold it open.
1.
Using a screwdriver (A), lift up slightly the socket clips
(B) of both ends on ...