Kia Soul EV: Lighting System / Sound Mood Lamp Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Lighting System / Sound Mood Lamp Repair procedures

Removal
[Sound Mood Lamp Unit]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the audio head unit.
(Refer to Body Electrical - "Audio unit")
3.
Disconnect the connector (A) from the mood lamp unit.

4.
Remove the sound mood lamp unit (A) after loosening the mounting nut.

[Sound Mood Lamp Switch]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the lower crash pad switch assembly (A) by pushing it.

4.
Disconnect the connectors (A) from the lower crash pad switch assembly.

5.
Remove the rheostat switch (A).

Installation
[Sound Mood Lamp Unit]
1.
Install the mood lamp unit.
2.
Install the audio head unit.
3.
Connect the negative (-) battery terminal.
[Sound Mood Lamp Switch]
1.
Connect the connectors and install the mood lamp switch.
2.
Install the crash pad lower panel.
3.
Connect the negative (-) battery terminal.
Sound Mood Lamp Schematic Diagrams
Circuit Diagram ...

Charge Information Lamp Components and Components Location
Components ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Runaway Arresting Device (RAD) Description and Operation


Description RAD is installed on each battery module. If the high voltage battery is swollen by cell overcharge, RAD cuts the ground of the main relay and the pre-charge relay. If the cell is overcharged, the switch turns OFF and the vehicle cannot be driven. RAD RAD on 10 cells RAD on ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Door Scuff Trim Components and Components Location


Component Location 1. Front door scuff trim2. Rear door scuff trim ...

Copyright © www.ksoulev.com 2020-2021