Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using the flat screw driver or remover, remove the crash pad center air vent panel (A).
3.
Disconnect the hazard switch connector (A).
4.
Remove center fascia upper panel (A) after loosening the mounting screws.
5.
Disco ...
Replacement
1.
Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
•
Be carefu ...