Other information:
Description
Installed in the Power Relay Assembly (PRA), the Pre-charge
Relay connects high voltage circuit when pre-charging the inverter
capacitor.
When the IG is ON, the current coming through the pre-charge
relay and the resistor charges the capacitor in the inverter and when
the cap ...
Inspection
1.
Remove the overhead console lamp assembly then check for
continuity between terminals. If the continuity is not as specified,
replace the map lamp switch.
No.Description1Ground (-)2Door (-)3Room/ Door (-)4Battery (+)
Removal
1.
Disconnect the negative (-) battery term ...