Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of the ambient temperature sensor
between terminals 1 and 2 whether it is changed by changing of the
ambient temperature.
1. Sensor Ground2. Ambient Sensor Signal
Speci ...
Replacement
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque :
16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m, 12.3 ~ 15.9 lb-ft)
2.
Detach the clips, then remove the rear door side weatherstrip (A).
3.
Install in the reverse order of removal.
...