Other information:
Inspection
High voltage battery heater temperature sensor is installed in modules No. 1 and No. 8.
1.
Turn the ignition switch OFF.
2.
Shut off the high voltage.
(Refer to Battery Control System - "High Voltage Shut-off Procedure")
3.
Remove the high volt ...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Loosen the bolt and then disconnect the universal joint assembly (A) from the pinion of the steering gear box.
Tightening torque :
32.4 ~ 37.3N.m (3.3 ~ 3.8kgf.m, 23.9 ~ 27.5lb- ...