Other information:
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Be careful not to da ...
Description
Installed in the Power Relay Assembly (PRA), the Pre-charge
Relay connects high voltage circuit when pre-charging the inverter
capacitor.
When the IG is ON, the current coming through the pre-charge
relay and the resistor charges the capacitor in the inverter and when
the cap ...