Kia Soul EV: Lighting System / High Mounted Stop Lamp Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Lighting System / High Mounted Stop Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the high mounted stop lamp trim (A).

3.
Detach the high mounted stop lamp (A) from the tailgate after loosening the mounting bolts.

4.
Remove the high mounted stop lamp (C) after disconnecting the connector (B) and hose (A).

Installation
1.
Install the high mounted stop lamp.
2.
Install the high mounted stop lamp trim.
3.
Connect the negative (-) battery terminal.
License Plate Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license plate lamp assembly (A). 3. Replace the bulb (B) after removing the license plate lamp (A). Installation ...

Luggage Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the luggage lamp (A). 3. Remove the luggage lamp (A) after disconnecting the connector (B ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Tail Gate Weatherstrip Repair procedures


Replacement 1. Remove the tail gate weatherstrip (A).     • Do not apply sealant to the body. 2. Install in the reverse order of removal.     • Install the weatherstrip aligned with center line (B). ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Rear Wiper Motor Repair procedures


Inspection Rear Wiper Motor 1. Remove the connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively. 3. Check that the motor operates normally. Replace the motor if it operates abnormally. No.Description1Battery (+) ...

Copyright © www.ksoulev.com 2020-2025