Kia Soul EV: Rearview Camera System / Description and Operation
Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position.
This supplemental system shows the back of the vehicle on the monitor when the vehicle is backing up.
This system is a supplmentary function only. It is the
responsibility of the driver to always check the back of the vehicle
through inside and outside rearview mirrors or directly whenever the
vehicle is backing up as there is a dead zone hidden from the camera. |
Removal
1.
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
2.
Remove the tailgate back panel.
(Refer to Body - "Tailgate Back Panel")
3.
Remove the back view camera (A) after ...
Other information:
Replacement
[Without Heat Pump]
1.
Remove the condenser, and then use an L wrench to remove the bottom cap (B) from the condenser.
Tightening torque :
9.8 ~ 14.9 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
2.
Remove the desiccant (A) from the condenser using a long
nose plier. Che ...
Specification
MotorJoint typeMax. permissible angleOuterInnerOuterInner80KWBJ#92TJ#9245°21°
Tightening Torques
ItemN.mkgf.mIb.ftFrontTire wheel hub nuts88.3 ~ 107.99.0 ~ 11.065.1 ~ 79.6Drive shaft coking nut274.6 ~ 294.228.0 ~ 30.0202.5 ~ 217.0Strut assembly to knuckle137.3 ~ 156.914.0 ...