Other information:
Inspection
1.
Remove the overhead console lamp assembly then check for
continuity between terminals. If the continuity is not as specified,
replace the map lamp switch.
No.Description1Ground (-)2Door (-)3Room/ Door (-)4Battery (+)
Removal
1.
Disconnect the negative (-) battery term ...
Components (1)
[General Type]
1. Roof trim2. Sunvisor [LH]3. Sunvisor [RH]
Components (2)
[Panorama sunroof Type]
1. Roof trim2. Sunvisor [LH]3. Sunvisor [RH]
...