Other information:
Inspection
1.
Check that the switch operates properly after disconnecting the room lamp connector (A).
Room Lamp
Removal
Room Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.
3.
Separate the room lamp ...
Components Location
1. High Voltage Battery System Assembly2. Electronic Power Control Unit (EPCU) [LDC+Inverter+VCU]3. ON-Board Charger (OBC)4. High Voltage Joint Box5. High Voltage Cable6. Motor Assembly7. Reduction
...