Other information:
Removal
1.
Open the roller blind using the panorama sunroof switch.
•
Leave 10 ~ 20cm (0.3937 ~ 0.7874 in) of the roller blind unopened.
2.
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly")
3.
Remove the roller blind bar (C) by ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the negative (-) battery terminal.
3.
Verify that the auto defogging actuator operates to the open
position when 12V is connected to terminal 3 and ground to terminal 4.
Verify that the auto defogging actuator operates to the c ...