Kia Soul EV: Indicators And Gauges / Instrument Cluster Description and Operation

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Indicators And Gauges / Instrument Cluster Description and Operation

Description
Mian Features
1.
Power and charge guage

(1)
It displays the degree of economic driving by identifying the status of a driver''s operation, depending on a vehicle''s driving conditions (e.g., required power, system efficiency and charging).
(2)
It leads to economic driving by informing the driver of the optimal driving conditions depending on the vehicle''s conditions.
(3)
It displays that ECO guide and power segment will operate during driving, and also indicates the state of regenerative braking when a charge zone is instructed while driving.
2.
SOC (State Of Charge) guage

(1)
It displays the amount of charge of high-voltage battery.
(2)
It displays the charged amount of SOC received from BMS module on the digital gauge in the instrument cluster (as follows).
Display
Increase (%)
Decrease (%)
Seg0
0
0
Seg1
5
3
Seg2
10
8
Seg3
15
13
Seg4
20
18
Seg5
25
23
Seg6
30
28
Seg7
35
33
Seg8
40
38
Seg9
45
43
Seg10
50
48
Seg11
55
53
Seg12
60
58
Seg13
65
63
Seg14
70
68
Seg15
75
73
Seg16
80
78
Seg17
85
83
Seg18
90
88

3.
ECO Level Display

(1)
It displays the degree of the driver''s economic driving via ECO level.
(2)
It displays the ECO level in OLED from Steps 1 to 8.
4.
Energy Flow

(1)
It displays graphical energy flow of an EV vehicle to inform the driver of the vehicle information.
(2)
It leads to economic driving by showing the energy flow diagram by means of intuitive images.
(3)
It displays three states of energy flow of the EV vehicle graphically.
(4)
VCU module receives operation mode CAN signals to implement any relevant animation.
5.
Other indicators and warning lamps
The status between C-CAN transmission modules, operating various indicator and warning lamps on the PS EV cluster, is shown. Referring to the following descriptions, any checking point or operating point can be identified in the event of inoperation of relevant function.

Instrument Cluster Schematic Diagrams
Circuit Diagram ...

Instrument Cluster Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the cluster fascia panel. (Refer to Body - "Cluster Fascia Panel") 3. Remove the cluster (A) after removing screws. ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Luggage Lamp Repair procedures


Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the luggage lamp (A). 3. Remove the luggage lamp (A) after disconnecting the connector (B). Installation 1. Install the luggage lamp assembly after connecting the lamp connector. ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Hood Insulator Pad Repair procedures


Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Install in the reverse order of removal.     • Replace any damaged clips ...

Copyright © www.ksoulev.com 2020-2024