Other information:
Adjustment
1.
After loosening the tail gate hinge (A) mounting bolt, adjust the tail gate by moving it up and down, or right and left.
2.
Adjust the tail gate height by turning the tail gate overslam bumpers (B).
3.
After loosening the tail gate striker (C) mounting bolts,
adjust the t ...
Inspection
Check the functions of the ECM in the following procedures:
1.
Turn the ignition key to the "ON" position.
2.
Cover the forward facing sensor.
3.
Flash a light onto the rearward looking sensor.
4.
The ECM should be darkened immediately on detecting light from the rearward ...