Inspection
Rear Wiper Motor
1.
Remove the connector from the rear wiper motor.
2.
Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively.
3.
Check that the ...
Inspection
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
Before filling the reservoir tank with water, check the
fil ...
Removal
QRA is integrated into the high voltage joint box and so each
part cannot be replaced separately. Refer to removal procedure of high
voltage joint box.
Installation
QRA is integrated into the high voltage joint box and so e ...
Description
Power relay assembly (PRA) is installed in the high voltage
battery system assembly and it consists of main relays which control the
high voltage, pre-charge relay, pre-charge resister and battery current
sensor. PRA controls high voltage of 360V between the high voltage
batte ...