Other information:
Inspection
Normal Charge Port Relay
Check for continuity between the terminals.
1.
There should be continuity between terminals No.20 and No.10
when power and ground are connected to terminals No.10 and No.9 in the
ICM-A.
Folding Motor Relay
Check for continuity between the terminals.
...
Description
Battery Current Sensor is installed in the Power Relay
Assembly and it measures the current when the high voltage battery is
being charged or discharged.
[With High Voltage Battery Heater System]
1. Main Relay (+)2. Main Relay (-)3. Pre Charge Relay4. Pre Charge Resistor5. B ...