Other information:
Inspection
C-CAN Terminating Resistance Inspection (Multi Purpose Check Connector)
1.
Turn the ignition OFF.
2.
Measure the resistance between pins No. 20 and No. 17 of multi purpose check connector (20 pins).
Measure the resistance between pins No. 3 and No. 11 of DLC (16 pins).
Spec ...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Be careful not to da ...