Removal
[Sound Mood Lamp Unit]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the audio head unit.
(Refer to Body Electrical - "Audio unit")
3.
Disconnect the connector (A) f ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using the flat screw driver or remover, remove the crash pad center air vent panel (A).
3.
Disconnect the hazard switch connecto ...
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Loosen the rear door inside handle mounting screws (A).
3.
Using a flat-tip screwdriver (B), pull up the rear door inside handle lock pin (C).
4.
Remove the rear door inside handle (A).
5.
Inst ...