Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the roof antenna connectors (A).
3.
Disconnect the roof antenna power connector (A).
4.
Remove the roof antenna after loosening a nut (A).
Installation
1.
Connect the roof antenna connectors.
2.
Install t ...
Inspection
Check the functions of the ECM in the following procedures:
1.
Turn the ignition key to the "ON" position.
2.
Cover the forward facing sensor.
3.
Flash a light onto the rearward looking sensor.
4.
The ECM should be darkened immediately on detecting light from the rearward ...