Kia Soul EV: Seat Electrical / Air Ventilation Seat Control Unit Description and Operation

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Control Unit Description and Operation

Description
The ventilated seat system generates cool wind by the Push method in the blower mounted under the seat which then travels through ducts to the seat back and cushion.

   
1)
Be careful not to spill drink or water on the seat equipped with ventilation system.
2)
As the blower draws in only small amount of air, it is hard to feel the air strength by touching it.
Air Ventilation Seat Control Unit Schematic Diagrams
Circuit Diagram ...

Air Ventilation Seat Control Unit Repair procedures
Removal Cushion Blower 1. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove the cushion blower (B) after loosening the screws and disconnecting the connector ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Troubleshooting


Basic Troubleshooting Basic Inspection Procedure Measuring Condition of Electronic Parts'' Resistance The measured resistance at high temperature after vehicle running may be high or low. So all resistance must be measured at ambient temperature (20°C, 68°F), unless stated otherwise. ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Battery Current Sensor Description and Operation


Description Battery Current Sensor is installed in the Power Relay Assembly and it measures the current when the high voltage battery is being charged or discharged. [With High Voltage Battery Heater System] 1. Main Relay (+)2. Main Relay (-)3. Pre Charge Relay4. Pre Charge Resistor5. B ...

Copyright © www.ksoulev.com 2020-2022