Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the luggage lamp (A).
3.
Remove the luggage lamp (A) after disconnecting the connector (B).
Installation
1.
Install the luggage lamp assembly after connecting the lamp connector. ...
Components
Connector Pin Information
No.DescriptionNo.Description1Ground signal 3 (Power ground)21Trip switch (-) input2Illumination output (-)22Trip switch 1 (+) input(Trip button)3Rheostat switch down input23Trip switch 2 (+) input(Cruise button)4Rheostat switch up input24-5Detent output (+) ...