Kia Soul EV: SRSCM / Side Impact Sensor (SIS) Description and Operation

Kia Soul EV (PS EV) 2015-2020 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description and Operation

Description
Side Impact Sensor (SIS) system consists of two P-SIS, installed at each center of front door modules (LH and RH), and two SIS, installed at each center of nearby pillars (LH and RH).
P-SIS or Pressure Side Impact Sensor detects pressure due to collision at its mounting location..
Side Impact Sensor is also called A-SIS as it detects acceleration.
SRSCM determines the deployment of airbag and the time of deployment based on the collision signal from the SIS at the time of collision.
Front Impact Sensor (FIS) Repair procedures
Removal     • Removal of the airbag must be performed according to the precautions / procedures described previously. • Before disconnecting the front ...

Side Impact Sensor (SIS) Components and Components Location
Components ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: High Voltage Shut-off Procedures


High Voltage Shut-off Procedure     Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries. ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Front Door Outside Handle Repair procedures


Replacement 1. Remove the hole plug (A). 2. After loosening the mounting bolt, remove the front door outside handle cover (B). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 3. Remove the front door outside handle (A) by sliding it backward. 4. Disconnect ...

Copyright © www.ksoulev.com 2020-2022