Kia Soul EV: Airbag Module / Side Airbag (SAB) Module Description and Operation
The Side Airbags (SAB) are installed inside the front seat to
protect the driver and front passenger from danger when side crash
occurs. The SRSCM determines deployment of side airbag by using Side
Impact Sensor (SIS) signal.
|
Never attempt to measure the circuit resistance of the airbag
module (squib) even with a specified tester as measuring circuit
resistance with a tester may result in accidental airbag deployment that
leads to serious personal injury. |
Removal
1.
Disconnect the battery negative cable and wait for at least thirty seconds before beginning to work.
2.
Remove the glove box housing.
(Refer to Body - "Glove box housing")
3.
...
Other information:
Special Service Tools
Tool Name / NumberIllustrationDescriptionHog ring clip installer09880-4F000Used to install hog ring clip
Personal Protective Equipment
NameIllustrationDescriptionInsulation glovesUsed when inspecting or working on the high voltage components[Insulation performance : ...
Removal
•
Be sure to read and follow the “General Safety Information
and Caution” before doing any work related with the high voltage
system. Failure to follow the safety instructions may result in serious
electrical injuries.
•
Be sure ...