Description
The primary purpose of the SRSCM (Supplemental Restraints
System Control Module) is to determine an event that warrants restraint
system air bag deployment. The SRSCM must decide wh ...
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning to work.
3.
Disconnect the DAB, PAB, SAB, ...
Removal
Main Relay, Pre Charge Relay, Pre Charge Resistor, Battery
Current Sensor, High Voltage Battery Heater Relay and the High Voltage
Battery Heater Fuse are integrated in the Power Relay Assembly (PRA). So
Refer to the removal procedure of Power Relay Assem ...