Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the roof antenna connectors (A).
3.
Disconnect the roof antenna power connector (A).
4.
Remove the roof antenna after loosening a nut (A).
Installation
1.
Connect the roof antenna connectors.
2.
Install t ...
Inspection
1.
Check the tire pressure.
(230+7 kPa (33psi+1.0psi)
2.
Check the tire tread wear.
(Refer to Suspension System - "Tire")
3.
Check if the wear of tire tread is uneven.
(Refer to Suspension System - "Alignment") ...