Other information:
   Replacement
[LH]
1.
Detach the rear seat belt lower anchor (C) by pushing the lock pin (B) of center mini buckle (A) with flat-tip driver. 
2.
Remove the rear seat cushion assembly. 
(Refer to Rear Seat - "Rear Seat Assembly")
3.
Loosen the mounting bolt, and then remove the rear seat  ...
   
   Component Location
1. Blower unit 
Components
1. High voltage PTC heater core2. Ionizer3. Evaporator temperature sensor4. Air inlet filter cover assembly5. Heater core pipe mounting bracket6. Heater - evaporator seal7. Intake duct case [LH]8. Intake arm9. Intake actuator motor assembly10. ...