Other information:
Replacement
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2.
Remove the front door outside handle base (A) by pushing in the lock pins located in the back.
3.
Remove the front door outside handle connector wiring harness (A).
4.
Remove the front door ...
Description
Battery Current Sensor is installed in the Power Relay
Assembly and it measures the current when the high voltage battery is
being charged or discharged.
[With High Voltage Battery Heater System]
1. Main Relay (+)2. Main Relay (-)3. Pre Charge Relay4. Pre Charge Resistor5. B ...