Other information:
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Pull out the relay from the engine compartment relay box.
Power Relay (Type A)
–
Do not use pliers.
–
Pliers will damage the relays, which could cause the engine to stall or n ...
Inspection
1.
Turn the ignition switch OFF.
2.
Shut off the high voltage.
(Refer to Battery Control System - "High Voltage Shut-off Prcedure")
3.
Remove the high voltage battery system assembly.
(Refer to High Voltage Battery System - Repair procedures - "Removal")
4.
Remove the hi ...