Kia Soul EV: SRSCM / Schematic Diagrams
| Circuit Diagram (1) |
| Circuit Diagram (2) |
| Circuit Diagram (3) |
| SRSCM Connector Terminal |
| Harness Connector |
| Pin No. | Function (Connector A) | Pin No. | Function (Connector B) | ||
| 1 | - | - | 1 | - | - |
| 2 | - | - | 2 | - | - |
| 3 | - | - | 3 | - | - |
| 4 | - | - | 4 | - | - |
| 5 | G | A/C Control Module (SBR PASS) | 5 | B | Passenger Side Impact Sensor (High) |
| 6 | - | - | 6 | Y | Passenger Side Impact Sensor (Low) |
| 7 | P | Smart Junction Box(Fuse - AIR BAG) | 7 | O | Driver Side Impact Sensor (Low) |
| 8 | R | Driver Front Impact Sensor (High) | 8 | G | Driver Side Impact Sensor (High) |
| 9 | L | Driver Front Impact Sensor (Low) | 9 | - | - |
| 10 | G | Passenger Front Impact Sensor (Low) | 10 | B | Ground (GF07) |
| 11 | O | Passenger Front Impact Sensor (High) | 11 | - | - |
| 12 | - | - | 12 | Gr | Driver Side Air Bag (High) |
| 13 | - | - | 13 | W/B | Driver Side Air Bag (Low) |
| 14 | - | - | 14 | P/B | Passenger Side Air Bag (Low) |
| 15 | - | - | 15 | O/B | Passenger Side Air Bag (High) |
| 16 | - | - | 16 | - | - |
| 17 | - | - | 17 | - | - |
| 18 | - | - | 18 | - | - |
| 19 | - | - | 19 | - | - |
| 20 | - | - | 20 | - | |
| 21 | - | - | 21 | R | Passenger Pressure Side Impact Sensor (Low) |
| 22 | - | - | 22 | L | Passenger Pressure Side Passenger Pressure Side |
| 23 | - | - | 23 | B | Driver Curtain Air Bag (High) |
| 24 | - | - | 24 | R | Driver Curtain Air Bag (Low) |
| 25 | Gr | Passenger Air Bag #3 (Low) | 25 | Y | Passenger Curtain Aig Bag (Low) |
| 26 | Y | Passenger Air Bag #3 (High) | 26 | W | Passenger Curtain Aig Bag (High) |
| 27 | - | - | 27 | - | - |
| 28 | - | - | 28 | - | - |
| 29 | - | - | 29 | - | - |
| 30 | - | - | 30 | - | - |
| 31 | - | - | 31 | G | Passenger Seat Balt Buckle Switch (+) |
| 32 | Br | Integrated Brake Actuation Unit (Local CAN Low) | 32 | B/O | Driver Seat Belt Buckle Switch (+) |
| 33 | G | Integrated Brake Actuation Unit (Local CAN High) | 33 | B | Driver Seat Belt Buckle Switch (-)- |
| 34 | O | Crash Output | 34 | L | Driver Anchor Pretensioner (High) |
| 35 | G | Driver Air Bag (2nd Satge (Low)) | 35 | Br | Driver Anchor Pretensioner (Low) |
| 36 | O | Driver Air Bag (2nd Satge (High)) | 36 | Y | Passenger Anchor Pretensioner(Low) |
| 37 | W | Passenger Air Bag #2 (High) | 37 | Gr- | Passenger Anchor Pretensioner(High) |
| 38 | G | Passenger Air Bag #2 (Low) | 38 | B | Driver Seat Belt Pretensioner (High) |
| 39 | L | Driver Air Bag (1st Satge (Low)) | 39 | R | Driver Seat Belt Pretensioner (Low) |
| 40 | Br/O | Driver Air Bag (1st Satge (High)) | 40 | Br | Passenger Seat Belt Pretensioner (Low) |
| 41 | Y | Passenger Air Bag #1 (High)v | 41 | L | Passenger Seat Belt Pretensioner(High) |
| 42 | Gr | Passenger Air Bag #1 (Low) | 42 | B | Passenger Seat BaltBuckle Switch (-) |
| 43 | Br | C-CAN (Low) | 43 | W | Driver Pressure Side Impact Sensor (Low) |
| 44 | W | C-CAN (High) | 44 | Br | Driver Pressure Side Impact Sensor (High) |
Occupant Detecting Sensor (ODS) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front passenger seat assembly. (Refer to the Body group- Seat)
3 ...
Brake System
...
Other information:
Kia Soul EV (PS EV) 2015-2020 Service Manual: Pre-Charge Registor Repair procedures
Removal Main Relay, Pre Charge Relay, Pre Charge Resistor, Battery Current Sensor, High Voltage Battery Heater Relay and the High Voltage Battery Heater Fuse are integrated in the Power Relay Assembly (PRA). So Refer to the removal procedure of Power Relay Assem ...
Kia Soul EV (PS EV) 2015-2020 Service Manual: Tail Gate Back Panel Components and Components Location
Component Location 1. Tail gate back panel ...
Copyright © www.ksoulev.com 2020-2025
