Description
The SRSCM shall monitor the status of the driver and front
passenger seat belt buckle. The SRSCM provides one pin each for the
driver and front passenger seat belt buckle status inp ...
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to Body - "Front seat")
3.
Remove th ...
Inspection
1.
Check that the switch operates properly after disconnecting the room lamp connector (A).
Room Lamp
Removal
Room Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.
3.
Separate the room lamp ...