Other information:
Inspection
1.
Check the suspension ball joint.
Check the grease leaks, kinks or damage in the front lower arm ball joint.
2.
Check the grease leaks, kinks or damage in the tie rod end ball joint. ...
Circuit Diagram
Connector Pin Information
No.Wire harness connectorPanorama motorBlind motor1Ground 1Ground 1Ground 22Glass status signal / Tool glassGlass status signal/ Tool (Parameter)Tool (Parameter)3IGN 2IGN 2-4Up switchUp switch-5---6Battery 1Battery 1Battery 27Ground 2SerialSerial8Vehic ...