Kia Soul EV: Seat Belt Pretensioner / Emergency Fastening Device (EFD) Description and Operation
Emergency Fastening Device (EFD) is deployed concurrently
with the Belt Pretensioner to strongly pull down the seat belt during a
deployment condition after a collision. It is located near the anchor on
driver and passenger seats to make up for the existing short stroke.
EFD is an auxiliary equipment that gives extra protection to the driver
and passenger from breaking away and leaning toward the anchor side
during a collision by preventing the seat belts from getting loose.
Never measure resistance of EFD directly as the electric
current from measuring device may cause unexpected deployment of airbag. |
Removal
1.
Disconnect the battery negative cable, and wait for at least thirty seconds before beginning to work.
2.
To remove the emergency fastening device (C), keep on pushing
the lock pin ...
Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure the resistance between terminals "1" and "2" of the evaporator temperature sensor.
4.
Connect the evaporator temperature sensor connector.
5.
Run the engine and turn ...
Removal
1.
Disconnect the battery negative cable, and wait for at least thirty seconds before beginning to work.
2.
To remove the emergency fastening device (C), keep on pushing
the lock pin (A) as arrow direction. And then remove the seat belt
after pushing the lock pin (B).
3.
Remo ...