Kia Soul EV: SRSCM / Seat Belt Buckle Switch (BS) Description and Operation

Kia Soul EV (PS EV) 2015-2020 Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Description and Operation

Description
The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.
Side Impact Sensor (SIS) Repair procedures
Removal Pressure Side Impact Sensor     • Removal of the airbag must be performed according to the precautions / procedures described previously. • ...

Seat Belt Buckle Switch (BS) Components and Components Location
Components ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Front Wiper Motor Repair procedures


Removal 1. Loosen the windshield wiper arm nut (B) after removing the wiper cap (A). 2. Remove the windshield wiper arm and blade. 3. If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius of wiper arm. 4. Disconnect the wash ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Power Window Switch Repair procedures


Inspection Power Window Main Switch Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front Door Trim") 3. Disconnect the connector (A) from the power window switch module. 4. Check for continuity between the terminals in e ...

Copyright © www.ksoulev.com 2020-2025