Other information:
Inspection
1.
Close the panorama sunroof glass and blind completely (Full close position).
2.
Disconnect the negative (-) battery terminal.
3.
Remove the roof trim assembly.
(Refer to Body - "Roof Trim")
4.
Remove the panorama sunroof glass motor (A) after loosening the screws and d ...
Replacement
[Without Heat Pump]
1.
Remove the condenser, and then use an L wrench to remove the bottom cap (B) from the condenser.
Tightening torque :
9.8 ~ 14.9 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
2.
Remove the desiccant (A) from the condenser using a long
nose plier. Che ...